A gateway that finds your meters by itself
The Zainergy gateway sits on the RS485 line of your panel, works out which meters are there and sends their readings to the cloud. Our team installs it, sets it up from the office and keeps it updated over the air.
What the gateway does
- Scans Modbus addresses 1 to 32 at six serial settings and names each meter from its fingerprint
- Reads each device on its own interval, from every minute up
- Sends over Wi-Fi to the cloud with its own security certificate
- Shows its state on its screen: Wi-Fi, cloud, meters read, and a red line when a meter stops sending
- Reports unknown devices' raw registers, so a new model can be added without a site visit
- Comes in several compact models; each recognises its own hardware and RS485 port by itself
Meters and devices we read
Ready-made profiles for 53 meter, analyzer, inverter and sensor models from 26 brands. A new model is added from the maker's communication manual and confirmed on your meter before it goes live.
- ABB
- Acrel
- Cellsa
- Chint
- Circutor
- Crompton
- Delixi Electric
- Delta
- Elmeasure
- Elster
- Fox ESS
- Hoptele
- Huawei
- Irhajhus
- Janitza
- Klemsan
- Lovato
- Meatrol
- Peacefair
- Phoenix Contact
- Schneider Electric
- Selec
- Sfere
- Solis
- Sungrow
- Tense
Brand names belong to their owners. Zainergy reads these devices over standard Modbus and is not affiliated with their makers.
Energy
Energy meters, multifunction meters, power analyzers with harmonics, smart breakers.
Solar
String and hybrid inverters, PV string monitors, net metering meters.
Process
Flow meters, level transmitters, temperature and humidity sensors, VFDs.
Gensets Coming
DeepSea and Cummins genset controllers through an RS485 converter.
Looked after from our office
Most service work happens without a visit to your site.
Over-the-air updates
New firmware is checked, tried and rolled back by itself if it fails. We try every release on our own bench first.
Remote settings
Reading intervals, devices and serial settings are changed from our back office. The gateway can be restarted or asked to scan again from there.
Meter replaced?
When a meter is changed, its energy counters carry on from the old meter's totals, so your monthly figures stay right.
Easy Wi-Fi setup
A technician holds one button and sets the site's Wi-Fi from a phone. No laptop needed.