Every feature of Zainergy EMS

Overview

The first page after sign-in, on web and mobile

The day at a glance for the whole customer: what you have used, what it cost and whether everything is reporting.

• Consumption today and this month, today's peak load, and the hour-by-hour load of today
• Estimated carbon footprint today and this month, and the CO₂ your solar saved
• Shortcuts into topology, real-time and the main meter's figures
• Favourite devices marked by you appear first
• Solar customers can open straight on their solar page

Real-time monitor

Any meter, refreshed every minute

• Line and phase voltages, currents, kW, kvar, kVA, power factor and frequency per phase
• Import and export energy counters, and THD where the meter measures it
• Device information as on the meter: model, address, gateway, last reading time

Historical trend

Any reading, any day or range your plan includes

• Charts of any reading over a day, a week, a month or your own range
• Energy per hour, day or month worked out from the meter's own counter
• A table under every chart, with a CSV download for Excel

Topology

Your single-line diagram as a live tree

Incomers, main panels, sub panels and loads in the order you set, each with its live load. Follow the energy from the transformer down to a single machine and see where it goes.

Building in 3D

For customers with a 3D model of the site

Your building as a 3D model you can turn and zoom, with each floor or zone coloured by its load and pins on the meters. Click a zone to open its figures. The values update live.

Tanks, flow and sensors

For devices other than energy meters on the same gateway

• Tank level with a tank drawing, volume and fill percentage
• Flow rate and totalised flow
• Temperature, humidity and other sensors with dials, today's lowest and highest, and graphs
• Drives (VFDs), smart breakers and PV string monitors read from their own Modbus registers

Status

Which devices are sending and when each last reported, the quality of each gateway's connection, and the storage your readings use.

Maximum demand

For every customer, on any meter

Maximum demand charges are set by your highest 30-minute block of the billing month. This page shows every block and helps you keep the next one down.

• 30-minute MDI for any meter and time range, and the peak of each billing month from your own reading day
• Ten highest blocks of the period, red above your target and green under it
• Block running now: a live box that turns red while the block heads over the target
• Save a target as an alert: the running block is projected every minute and a warning appears at the top of the app before the block closes
• MDC and demand cost from your tariff

Bills, tariff and cost

• Upload your utility bills as PDF, several at once. The platform reads them, keeps them and compares the billed units and demand with your meter
• The tariff fills itself from the newest bill: grid rate, fixed charges and other charges
• Rates per month for grid, selling to the grid and genset, used for every cost figure in the app
• Cost per day, month and meter, so each department sees its share

PF plant

For every customer with energy meters

Monitors your power factor improvement plant like the utility bills it, and tells you whether it is the right size.

• Performance: power factor as billed per billing month, time in each PF band, leading PF, peak kVA and the penalty it caused
• Bank output against what the installed kvar should give at the measured voltage
• Sizing from your own 30-minute blocks: the kvar you need, the design figure, the nameplate at your capacitor voltage and detuning, and a suggested stage plan
• A verdict on the installed plant, with THD and the resonance order with your transformer
• Penalty estimate on uploaded bills, with the threshold and rate as settings
• Plant details kept per supply meter: kvar, stages, reactor, controller, commissioning date

Power quality

From an installed meter that measures harmonics

The same report a survey with a portable analyzer gives, made from the meter already in your panel, for any period up to 31 days at 5 or 10 minute intervals.

• Voltages, unbalance, voltage THD, currents, current THD and TDD, kW, PF, frequency, kvar and kVA
• Voltage and current harmonic spectrum up to the 31st
• Compliance table against EN 50160 and IEEE 519-2022, pass or fail per item
• TDD with its own chart and per-phase statistics against the IEEE 519 limit
• Effect on equipment: K-factor, extra copper losses and harmonic current
• Active harmonic filter sizing: modules, spare capacity, THD and TDD after the filter, and a static var generator option for power factor
• Recommendations and method, printed as a PDF under your name

Solar and net metering

For sites with solar, net metering or gensets

• Each site's grid, solar and genset meters added up: import, export, solar self-use and total consumption
• PV generation report: each site's solar against what it is expected to make per day, from its installed capacity
• Saving from solar in rupees, using your buying and selling rates
• Solar inverters read directly over Modbus

Shop timing

For retail chains and offices with set opening hours

Consumption inside opening hours against full load for each site, day by day, and the saving against running at full load.

Alerts

• Set a value with an allowed plus and minus percentage on any reading of any meter
• Checked every minute; open alerts stay in the bar at the top of every page until they clear
• Demand alerts warn while the 30-minute block is still running
• An Alerts page keeps every alert, newest first

AI report Add-on

Choose a meter, or several to compare, and a period. The platform reads the readings and writes a plain-language report: what happened, what it cost and what to do next. Reports are written for maximum demand, PF plant and power quality.

Voice assistant Add-on

Ask your plant questions out loud, in Urdu, English or both: "What was yesterday's peak?" or "Is the capacitor bank working?" The assistant answers from your own readings. Switched on for all users or chosen ones.

Sites and site logins

• Several sites under one account, with devices grouped by site
• A login for one site sees only that site's devices, including ones added later
• Your short name, for example "JJ", shown beside your name across the app

Users and roles

• Customer users see their own sites; staff can be given several customers
• Forgot your password? A new one arrives by email; the old one keeps working until the new one is used
• Only administrators change meters and settings, so your figures stay the same for everyone

Names and hierarchy

Name every device your way and place it under site, building, panel and feeder. Fill the list in Excel or CSV and load it in one go. The topology follows the hierarchy you set.

Your look and brand

Dark or light, with a choice of colours for the page and charts. Partners and large customers can have their own name, logo and web address. See partners.

Data history

Readings are never deleted. Your plan sets how far back you can look: 12 months on Pro, 24 months on Pro Plus. See plans.